Need help?Do you have a question about the Fujitsu PRIMERGY TX120 S3 and is the answer not in the manual?
Defines the manual's purpose and intended audience for server installation and operation.
Lists other related manuals and resources for more comprehensive information on the server.
Explains symbols, formatting, and conventions used throughout the manual for clarity.
Highlights the key capabilities and functions of the PRIMERGY TX120 S3 server.
Details the technical specifications of the server hardware, including interfaces, components, and dimensions.
Provides critical safety guidelines for operating and maintaining the server to prevent injury or damage.
States compliance with European directives for electromagnetic compatibility and low voltage.
Details the server's compliance with ENERGY STAR standards for energy efficiency.
Outlines FCC regulations for digital devices and potential radio interference in residential environments.
Gives instructions and cautions for safely moving the server to prevent damage.
Discusses environmentally friendly product design, energy saving, and packaging information.
Step-by-step guide for safely unpacking the server and checking contents against the delivery note.
Instructions for positioning the server vertically or horizontally at its installation location.
Detailed steps for placing the server in an upright position using attached stabilizers.
Instructions for placing the server in a horizontal orientation on its rubber feet.
Explains how to connect external devices using rear and front panel ports.
Guides on connecting the server's power supply unit to the electrical outlet.
Describes how to secure the power cable with cable ties to prevent accidental disconnection.
Provides important precautions and procedures for connecting and disconnecting various cables.
Instructions for opening and removing the server's front drive cover.
Steps to unlock the server and remove the hard disk drive cover.
Identifies and explains the function of front and rear panel controls and status indicators.
Details indicators and controls located on the front panel, including ID card and button functions.
Details indicators (CSS, Global Error, ID) located on the rear panel of the server.
Explains the status indicators for LAN connections, link/transfer, and speed.
Provides instructions for powering the server on and off, including different methods.
Guides on configuring onboard SATA and SAS/SATA RAID controllers and installing the operating system.
Steps for configuring the integrated SATA controller before or during OS installation.
Instructions for configuring the SAS/SATA RAID controller.
Explains using ServerView for server configuration and OS installation.
Details OS installation without ServerView, configuring SATA/RAID controllers.
Provides safety precautions and methods for cleaning the server and peripherals.
Describes methods to restrict physical access to the server's buttons and drives.
Explains BIOS security features for data protection and preventing unauthorized access.
Solutions for when the server's power-on indicator does not light up.
Addresses issues where the server unexpectedly shuts down.
Troubleshooting steps for a blank monitor display.
Advice for resolving flickering or distorted display issues on the monitor.
Solutions for cases where no display appears or the image drifts.
Troubleshooting steps if the mouse pointer is not visible on the screen.
How to set and resolve issues with incorrect system date and time.
Explains errors related to drives being reported as "dead" during system startup.
Troubleshooting for newly added drives reported as defective.
Guidance on understanding and resolving on-screen error messages.
To Next Page
General