Fujitsu PRIMERGY TX120 S3 - 6.5.4 Configuring the server and installing the operating system without the ServerView Installation Manager

72 Operating Manual TX120 S3
Starting up and operation
6.5.4 Configuring the server and installing the operating
system without the ServerView Installation
Manager
Configuring the onboard SATA controller
Configure the controller as described in section "Configuring the onboard SATA
controller" on page 70.
Configuring the SAS/SATA RAID controller
Configure the controller as described in section "Configuring the onboard SATA
controller" on page 70.
Installing the operating system
Ê Insert the CD/DVD for the operating system you want to install.
Ê Reboot the server.
Ê Follow the instructions on screen and in the manual for the operating
system.