Fujitsu PRIMERGY TX1320 M1

Operating Manual - English
FUJITSU Server PRIMERGY TX1320 M1
Operating Manual
Edition July 2014

Fujitsu PRIMERGY TX1320 M1 Specifications

General

Processor Sockets	1
Memory Slots	4
Form Factor	Tower
Processor	Intel Celeron
Storage	Up to 4 x 3.5" or 2.5" drives
Drive Bays	4 x 3.5-inch or 8 x 2.5-inch
RAID Support	RAID 0, 1, 10
Network Controller	Dual-port Gigabit Ethernet
Operating System Support	Linux

Summary

Introduction

Functional Overview

Server Features and Management

Details server features, management tools (iRMC, ServerView), and remote access capabilities.

System Components and Storage

Explains system board, TPM, storage options, and controller configurations.

Detailed Server Specifications

Provides comprehensive technical details on hardware, interfaces, slots, dimensions, and environmental conditions.

Installation Steps Overview

Pre-Installation Safety and Preparation

Server Physical Setup and Connection

Peripheral Connection and Cabling

Important Information

General Safety and Handling Guidelines

Crucial safety instructions for operation, installation, repairs, and handling components.

Environmental and Component Handling Precautions

Regulatory Compliance and Disposal

Hardware Installation

Pre-Installation Safety and Acclimatization

Emphasizes safety and environmental acclimatization before hardware installation.

Server Unpacking and Setup

Device Connection and Cabling

Starting Up and Operation

Control Panel and Indicator Guide

Server Power Management

Covers procedures for switching the server on and off, including alternative methods.

Server Configuration and OS Installation

Guides on configuring controllers and installing the operating system using ServerView or manually.

Troubleshooting and Tips

Power-On Indicator and Server Shutdown Issues

Screen Display and Input Device Problems