Need help?Do you have a question about the Fujitsu Primergy RX4770 M1 and is the answer not in the manual?
Details essential safety precautions and warnings for operating the server.
Explains how to use diagnostic tools to identify hardware problems.
Step-by-step guide for installing hot-plug power supply units.
Step-by-step guide for removing hot-plug power supply units.
Detailed instructions for replacing a defective hot-plug power supply unit.
Step-by-step guide for installing 2.5-inch storage modules.
Step-by-step guide for removing 2.5-inch storage modules.
Instructions for replacing 2.5-inch storage modules.
Step-by-step guide for replacing a system fan.
Procedures for installing, removing, and replacing expansion cards.
Step-by-step instructions for installing memory modules (DIMMs).
Step-by-step guide for installing new processors into the server.
Step-by-step guide for removing processors from the server.
Instructions for upgrading or replacing server processors.
Detailed procedures for replacing the server's main system board.
General| Product Family | Primergy |
|---|---|
| Model | RX4770 M1 |
| Maximum Number of Processors | 4 |
| Processor | Intel Xeon Scalable |
| Memory | DDR4 |
| Maximum Memory | 6 TB |
| Storage Bays | Up to 24 x 2.5" or 12 x 3.5" |
| RAID Support | RAID 0, 1, 5, 6, 10, 50, 60 |
| Network Interfaces | optional 10GbE |
| Expansion Slots | Up to 10 PCIe 3.0 slots |
| Power Supply | Redundant Power Supply |
| Operating System Support | Windows Server, Linux |
| Management | iRMC S4 (integrated Remote Management Controller) |
To Next Page