Ê "Updating RAID controller firmware" on page 70
Ê If applicable, "Enabling Option ROM scan" on page 71.
Ê "Enabling SVOM boot watchdog functionality" on page 74
Ê "Resuming BitLocker functionality" on page 80
9.3.2 Removing expansion cards
9.3.2.1 Preliminary steps
Ê "Locating the defective server" on page 43
Ê "Suspending BitLocker functionality" on page 59
Ê "Shutting down the server" on page 46
Ê Remove all external cables from the expansion card to be removed.
Ê "Disconnecting power cords" on page 46
Ê "Getting access to the component" on page 48
Upgrade and Repair Unit
(URU)
Hardware: 5 minutes
Tools: Phillips PH2 / (+) No. 2 screw driver
To Next Page
Loading...
Need help?
General