14.2.3 Installing the CMOS battery
Figure 170: Installing the CMOS battery
Ê Press against the locking spring (1) and insert the fresh CMOS battery (2).
Ê Release the locking spring. Ensure that the locking spring is properly
engaged.
14.2.4 Concluding steps
Ê Dispose of the CMOS battery in accordance with local regulations
concerning special waste.
Ê "Reassembling" on page 53
Ê "Connecting the server to the power source" on page 57
Ê "Switching on the server" on page 58
Ê "Verifying system information backup / restore" on page 69
Ê "Verifying the system time settings" on page 77
To Next Page
Loading...
Need help?
General