Ê If applicable, "Updating or recovering the system board BIOS and iRMC" on
page 67
Ê "Switching on the server" on page 58
Ê "Enabling SVOM boot watchdog functionality" on page 74
Ê "Resuming BitLocker functionality" on page 80
11.5 Handling processor heat sinks
11.5.1 Preliminary steps
Ê "Shutting down the server" on page 46
Ê "Disconnecting power cords" on page 46
Ê "Getting access to the component" on page 48
Ê "Removing memory boards" on page 220
Ê "Removing the mid-brace" on page 232
Field Replaceable Unit
(FRU)
if thermal paste is involved
Hardware: 15 minutes
Upgrade and Repair Unit
(URU)
Tool: Philips PH2 / (+) No. 2 screw driver