I For detailed information on how to access the BIOS and modify
settings, refer to the corresponding BIOS Setup Utilty reference
manual available online at
http://jp.fujitsu.com/platform/server/primergy/manual/.
Ê "Switching on the server" on page 58
Ê "Resuming BitLocker functionality" on page 80
14.4.2 Removing the TPM
V CAUTION!
Advise your contact persons that they must provide you with TPM
backup copies. For security reasons, the TPM must be restored/re-
saved by the customer. After installing a new system board, the TPM
must be enabled. You may not clear the TPM data.
If the contact persons DO NOT have a backup copy available, inform
them that replacing the TPM will cause to lose all data.
14.4.2.1 Preliminary steps
Ê Before removing the TPM, it is necessary to remove BitLocker-protection
from the computer and to decrypt the volume.
Field Replaceable Unit
(FRU)
Hardware: 30 minutes
Tools: Removing the system board:
– Philips PH2 / (+) No. 2 screw driver
Installing the TPM:
– Bit screw driver
– flat nose pliers
– combination pliers
– TPM bit insert
(
*
)
(
*
)
For the Japanese market:
– TPM module fixing tool (S26361-F3552-L909)
To Next Page
Loading...
Need help?
General