RX4770 M1 Upgrade and Maintenance Manual 21
2 Before you start
Before you start any upgrade or maintenance task, please proceed as follows:
Ê Carefully read the safety instructions in chapter "Important information" on
page 31.
Ê Make sure that all necessary manuals are available. Refer to the
documentation overview in section "Documents you need at hand" on
page 29. Print the PDF files if required.
Ê Make yourself familiar with the procedure categories introduced in section
"Classification of procedures" on page 23.
Ê Ensure that all required tools are available according to section "Tools you
need at hand" on page 27.
V CAUTION
In a system that has the Cool-safe
®
Advanced Thermal Design option,
only components that support the higher operating range may be
installed. Further information on this is available in the configurator.
Installing optional components
The operating manual of your server gives an introduction to server features
and provides an overview of available hardware options.
Use the Fujitsu ServerView Suite management software and the iRMC web
frontend to prepare hardware expansions. ServerView Suite documentation is
available online at http://manuals.ts.fujitsu.com
(http://jp.fujitsu.com/platform/server/primergy/manual/ for the Japanese market).
Please refer to the following ServerView Suite topics:
– Operation
– Virtualization
– Maintenance
– Out-Of-Band Management
The Cool-safe
®
Advanced Thermal Design option can
only be ordered from the manufacturer and is indicated
by the logo on the identification rating plate.
To Next Page
Loading...
Need help?
General