Figure 173: Connecting the UFM
Ê Place the UFM to the BMC riser using the UFM spacer installed.
Ê Screw the UFM onto the UFM spacer using the UFM nylon screw (pos.3,
figure 171).
Screw torque: 0.06 Nm
14.3.2.3 Concluding steps
Ê "Reassembling" on page 53
Ê "Connecting the server to the power source" on page 57
Ê "Switching on the server" on page 58
Ê "Enabling SVOM boot watchdog functionality" on page 74
Ê "Resuming BitLocker functionality" on page 80
To Next Page
Loading...
Need help?
General