Ê "Enabling SVOM boot watchdog functionality" on page 74
Ê "Resuming BitLocker functionality" on page 80
Ê "Updating RAID controller firmware" on page 70
9.5 BMC riser
9.5.1 Replacing the BMC riser
I The UFM is located on the BMC riser. Please make sure that the current
UFM will be kept in the system on the new BMC riser.
The microSD card (if applicable) is located on the BMC riser. Please
make sure that the current microSD card will be kept in the system on the
new BMC riser.
9.5.1.1 Preliminary steps
Ê "Suspending BitLocker functionality" on page 59
Ê "Disabling SVOM boot watchdog functionality" on page 60
Ê "Shutting down the server" on page 46
Ê "Disconnecting power cords" on page 46
Ê "Getting access to the component" on page 48
Upgrade and Repair Unit
(URU)
Hardware: 5 minutes
Tools: Phillips PH2 / (+) No. 2 screw driver
To Next Page
Loading...
