8.2 Replacing the system fan
8.2.1 Preliminary steps
Ê "Locating the defective server" on page 43
Ê "Getting access to the component" on page 48
V CAUTION!
To ensure continuous air flow for cooling the components it is
recommended to place the removed top cover on rear end of the
server during fan replacement procedure.
Ê "Locating the defective component" on page 45
Upgrade and Repair Unit
(URU)
Hardware: 5 minutes
Tools: Phillips PH2 / (+) No. 2 screw driver
To Next Page
Loading...
Need help?
General