Figure 152: Closing socket release lever 1
Ê Close the socket release lever marked Open 1st (1) and latch it under the
load plate retention tab (2).
11.3.3 Concluding steps
Ê "Installing processor heat sinks" on page 252
Ê "Installing the mid-brace" on page 239
Ê "Installing memory boards" on page 223
Ê "Installing expansion cards" on page 142
Ê "Reassembling" on page 53
Ê "Connecting the server to the power source" on page 57
Ê If applicable, "Updating or recovering the system board BIOS and iRMC" on
page 67
Ê "Switching on the server" on page 58
Ê "Enabling SVOM boot watchdog functionality" on page 74
Ê "Resuming BitLocker functionality" on page 80
To Next Page
Loading...
Need help?
General