Ê "Shutting down the server" on page 46
Ê "Disconnecting power cords" on page 46
Ê "Getting access to the component" on page 48
14.3.3.2 Removing the UFM
Figure 174: Removing the UFM
Ê Remove the nylon screw on the defective UFM (1).
Ê Disconnect and remove the defective UFM (2).
Ê The UFM spacer remains on the BMC riser.
14.3.3.3 Concluding steps
Ê "Reassembling" on page 53
Ê "Connecting the server to the power source" on page 57
Ê "Switching on the server" on page 58
Ê "Enabling SVOM boot watchdog functionality" on page 74
Ê "Resuming BitLocker functionality" on page 80