Fujitsu Primergy RX4770 M1 - Installing the LSD Module; Concluding Steps

262 Upgrade and Maintenance Manual RX4770 M1
Accessible drives
12.1.3 Installing the LSD module
Installing the LSD module
Figure 161: Connecting the cable to the LSD module
Ê Plug the cable into the new LSD module.
Ê Reinstall the memory board in slot #8 and the respective memory divider.
12.1.4 Concluding steps
Ê "Installing memory boards" on page 223
Ê "Reassembling" on page 53
Ê "Connecting the server to the power source" on page 57
Ê "Resuming BitLocker functionality" on page 80