9.6.3 Replacing the iRMC microSD card
9.6.3.1 Preliminary steps
Ê "Locating the defective server" on page 43
Ê "Shutting down the server" on page 46
Ê "Disconnecting power cords" on page 46
Ê "Getting access to the component" on page 48
9.6.3.2 Replacing the iRMC microSD card
Ê Remove the defective SD card as described in section "Removing the iRMC
microSD card" on page 165.
Ê Install the new SD card as described in section "Installing the iRMC microSD
card" on page 164.
9.6.3.3 Concluding steps
Ê "Reassembling" on page 53
Ê "Connecting the server to the power source" on page 57
Ê "Switching on the server" on page 58
Upgrade and Repair Unit
(URU)
Hardware: 5 minutes
Tools: Phillips PH2 / (+) No. 2 screw driver
Side-cutting pliers
To Next Page
Loading...
Need help?
General