Fujitsu PRIMERGY TX1320 M1 User Manual

12 Operating Manual TX1320 M1
Introduction
1.1 Concept and target groups for this manual
This operating manual describes how to install, set up and operate your server.
This operating manual is intended for those responsible for installing the
hardware and ensuring that the system runs smoothly. It contains all the
information you need to put your PRIMERGY TX1320 M1 into operation.
To understand the various expansion options, you will need to be familiar with
the fields of hardware and data transmission and you will require a basic
knowledge of the underlying operating system.
1.2 Documentation overview
More information on your PRIMERGY TX1320 M1 can be found in the following
documents:
– "Quick Start Hardware - FUJITSU Server PRIMERGY TX1320 M1"
(only included as a printed copy)
– "Quick Start Guide"
– "Safety Notes and Regulations" manual
" 安全上のご注意 " for the Japanese market
– "Warranty" manual
" 保証書 " for the Japanese market
– "ServerView Suite Local Service Concept - LSC" manual
– "Returning used devices" manual and "Service Desk" leaflet
" サポート＆サービス " for the Japanese market
– "FUJITSU Server PRIMERGY TX1320 M1 Upgrade and Maintenance
Manual"
– “D3239 BIOS Setup Utility for FUJITSU Server PRIMERGY TX1320 M1
Reference Manual"

Fujitsu PRIMERGY TX1320 M1 Specifications

General

Processor Sockets	1
Memory Slots	4
Form Factor	Tower
Processor	Intel Celeron
Storage	Up to 4 x 3.5" or 2.5" drives
Drive Bays	4 x 3.5-inch or 8 x 2.5-inch
RAID Support	RAID 0, 1, 10
Network Controller	Dual-port Gigabit Ethernet
Operating System Support	Linux