Fujitsu PRIMERGY TX1320 M1 User Manual

TX1320 M1 Operating Manual 77
Starting up and operation
If you are using the ServerView Installation Manager, you can skip the following
section on how to configure the server and install the operating system.
Continue from section "Cleaning the server" on page 78.
6.5.4 Configuring the server and installing the operating
system without the ServerView Installation
Manager
Configuring the onboard SATA controller
Configure the controller as described in section "Configuring the onboard SATA
controller" on page 75.
Configuring the SAS/SATA RAID controller
Configure the controller as described in section "Configuring the onboard SATA
controller" on page 75.
Installing the operating system
Ê Insert the CD/DVD for the operating system you want to install.
Ê Reboot the server.
Ê Follow the instructions on screen and in the manual for the operating
system.

Fujitsu PRIMERGY TX1320 M1 Specifications

General

Processor Sockets	1
Memory Slots	4
Form Factor	Tower
Processor	Intel Celeron
Storage	Up to 4 x 3.5" or 2.5" drives
Drive Bays	4 x 3.5-inch or 8 x 2.5-inch
RAID Support	RAID 0, 1, 10
Network Controller	Dual-port Gigabit Ethernet
Operating System Support	Linux