To Next PageTo Next Page
Need help?Do you have a question about the Fujitsu primergy TX150 and is the answer not in the manual?
General| Form Factor | Tower |
|---|---|
| Network Interface | 2 x Gigabit Ethernet |
| Operating System Support | Windows Server, Linux |
| Storage | Up to 4 x 3.5" HDD/SSD |
| RAID Support | RAID 0, 1, 10 |
| Power Supply | 350W |
| Memory | Up to 32GB DDR3 |
Details on ServerStart setup tool and high reliability tools for stable operation.
ServerStart utility for easy OS installation and driver setup.
Software for stable system operations, error recovery, and diagnostics.
Step-by-step guide on how to power on the server safely and correctly.
Step-by-step guide on how to properly shut down and power off the server.
Procedures for preparing the server before OS installation, including hardware setup.
Explains essential hardware settings before OS installation, including BIOS.
Guide to configuring BIOS settings like boot drive and remote installation options.
Assists in choosing the appropriate OS installation method for the server.
Recommends ServerStart for automated OS installation and driver setup.
Important notes and cautions to consider before starting the OS installation process.
Key considerations and notes for configuring RAID systems with onboard or controller cards.
Steps to install ServerStart on a client PC for preconfiguration or driver disk creation.
Instructions for installing the ServerStart application on a client computer.
Step-by-step wizard-driven process for OS installation using ServerStart.
Procedures to initiate and start the guided OS installation process with ServerStart.
Method for setting and saving installation information in a configuration file on a client PC.
Steps to launch and begin the preconfiguration setup using ServerStart.
Advanced mode for OS installation, allowing partition formatting and manual setup.
Procedures to launch and initiate the expert mode OS installation.
Utility for partitioning and formatting disk drives as part of the OS installation.
Method for installing the OS over a network using ServerStart.
Outlines the necessary system requirements for remote installation servers.
Steps to prepare the PXE server for network-based OS installation.
Guides on performing OS installation remotely via a PXE server.
Instructions on creating necessary driver disks for manual OS installation.
Lists the specific driver disks needed for various OS installations.
Step-by-step guide for manually installing the operating system on the server.
Detailed procedure for manually installing Windows Server 2003 x64.
Detailed procedure for manually installing Windows Server 2003 / SBS 2003.
Software for managing RAID configurations, disk initialization, and array monitoring.
Procedures for installing the Global Array Manager tool.
Tool for monitoring server hardware status and providing real-time notifications of errors.
Comprehensive guide to configuring server settings via the BIOS setup utility.
Procedures for accessing and exiting the BIOS setup utility.
Guidance on diagnosing and resolving hardware, software, and message-related issues.
Troubleshooting steps for common hardware problems with the server and display.
Explanations of Power On Self Test (POST) error messages and their resolutions.
Troubleshooting steps for software issues during OS installation and operation.
