230
Chapter 8 Configuring Hardware and Utilities
8.2.10 IPMI Submenu
Use this submenu to configure server management settings.
Power Failure Recovery • Always On
•Always Off
• Previous State (Initial
value)
Sets whether to turn the power on or off after a
temporary main power outage due to power
interruption, etc.
Note:
` For UPS scheduled operation, set to
[Always On]. Otherwise, the power may
not be turned on at the specified time.
table: Items on the IPMI Submenu
Item Setting Description
SEL Load Displays the usage of event log space as a percentage.
Clear System Event Log • Disabled
(Initial value)
• Enabled
Sets whether or not to clear the event log.
Event Log Full Mode • Overwrite
(Initial value)
• Maintain
Sets whether or not to overwrite the event log when
space available for it becomes full.
Note:
` Changing this setting deletes the existing
event log. Before making changes, refer to
"9.3.1 How to Use Server Management Tools"
(Jpg.272) for saving the event log.
BMC Time Sync Enabled (Unchangeable) Synchronizes the internal clock of the Baseboard
Management Controller (BMC) with the system
time.
System Event Log Displays the system event logs. Press the [Enter] key to display the system event
log window. Display previous and subsequent entries using [+] [-] keys.
SDRR Browser Displays sensor information. The SDRR Browser is displayed by pressing [Enter].
table: Items on the Power On/Off Submenu
Item Setting Description
Item Specific Help
Change Values
Enter
F9
Select Item
Select Menu
Select Sub-Menu
-/+
F1
Esc
Help
Exit
F7
Mod. Defaults
Previous Values
Advanced Security Server ExitMain
IPMI
xx%
[Disabled]
[Overwrite]
[Enabled]
SEL Load
Clear System Event Log
Event Log Full Mode
BMC Time Sync
System Event Log
SDRR Browser
LAN Setting
To Next Page
Loading...
Need help?
General