85
PRIMERGY TX150 S4 User’s Guide
3
OS Installation Using ServerStart
3.3.3 OS Installation Wizard
Set computer information, user information, and the network protocol.
ServerStart can configure multiple network patterns. When configuring a domain controller, refer to
"Using ServerStart to Configure the Network".
` The setting window differs depending on the OS to be installed. The following describes operations on
Windows Server 2003 R2.
To install another OS, interpret Windows Server 2003 R2 as your OS.
1 Click [Installation Wizard for MS Windows Server 2003].
A message prompts you to specify the configuration file.
2 Click [No].
The [Windows Server 2003 Installation] window appears.
3 Enter the password in [Password for Administrator account] and [Please repeat
Password] and click [Next].
` If the password differs between [Password for Administrator account] and [Please repeat Pass-
word], an error dialog window appears. Enter the password correctly.
The [Computer Identification] window appears.
4 Set items and click [Next].
The [Installation Directory and Time Zone] window appears.
` When using the CD-ROM applied Service Pack 1 on Windows Server 2003, select the [(OS)
including SP1] menu from the [Operating System Type] list.
5 Set items and click [Next].
The [User Name] window appears.
6 Set items and click [Next].
The [Display Settings] window appears.
7 Set items and click [Next].
The [Network Protocol] window appears.
To Next Page
Loading...
