27
PRIMERGY TX150 S4 User’s Guide
1
Overview
g Parallel port ( )
A printer cable is plugged in.
h USB connector ( )
Connects peripheral equipment conforming to the USB standard (2.0 or 1.1).
i LAN (10/100/1000BASE-T) port ( )
An Unshielded Twisted Pair (UTP) cable is plugged in.
For 1000Mbps connection, a category 5 enhanced or a category 6 cable is required.
For 10Mbps/100Mbps connection, a category 5 or higher cable is required.
The meaning of the LED is shown in the table below.
j Display connector ( )
A display cable is plugged in.
table: Meaning of the LAN Port LED
LED
location
LED status Connection status
Upper LED Lights in green Link is being established
Blinks in green Data is being transferred
Lower LED Lights in green Connection established at
1000Mbps
Lights in amber Connection established at
100Mbps
Off Connection established at 10Mbps
LED