Need help?Do you have a question about the Fujitsu PRIMERGY TX150 S3 and is the answer not in the manual?
General| Form Factor | Tower |
|---|---|
| Processor | Intel Celeron |
| Memory | Up to 8GB DDR2 667/800 MHz |
| Storage | Up to 4 x 3.5" SATA HDD |
| RAID | RAID 0, 1, 5, 10 |
| Network | Gigabit Ethernet |
| Expansion Slots | 1 x PCI-E x16, 1 x PCI-E x4, 2 x PCI |
| Power Supply | 500W |
| Operating System Support | Microsoft Windows Server 2003, Red Hat Enterprise Linux, SUSE Linux Enterprise Server |
Details available PRIMERGY manuals and their formats, including online access.
Information on expanding server memory and adding additional hard disk drives.
Explanation of symbols, formatting, and terms used throughout the manual for clarity.
Crucial safety guidelines for environmental conditions and handling the server before operation.
Safety precautions for power connection, peripheral attachment, and cable management.
Guidelines for correct battery replacement, handling, and disposal to prevent hazards.
Instructions for safe use of CD/DVD drives, including handling CDs and laser safety.
Procedures for safely handling components sensitive to electrostatic discharge (ESD).
Steps to prepare the floorstand server, including opening the chassis and removing covers.
Steps to prepare the rack server, including opening the chassis and removing covers.
Rules for populating memory banks with modules, including capacity and interleaving.
Detailed instructions for installing new or replacing existing main memory modules.
Procedure for installing accessible drives like tape drives or optical drives into 5.25-inch bays.
Instructions for installing an extension box to add more hard disk drives to the server.
Step-by-step guide for installing controller cards into the server's PCI slots.
Reference table for selecting and assembling appropriate controllers in specific PCI slots.
Information on the RemoteView Service Board S2 LP, its function, and installation.
Procedure for installing an external SCSI interface for connecting peripheral cabinets.
Steps to remove the existing standard power supply unit from the server.
Procedure for installing the hot-plug power supply cage, backplane, and PSU module.
Instructions for installing dummy covers, anti-tilt brackets, and SDR updates.
Steps to reattach hard disk cover, front cover, and close the floorstand server.
Steps to reattach rack front cover and close the server.
Instructions for mounting the server into a rack cabinet.
Steps to remove anti-tilt bracket, covers, and rubber feet from the floorstand model.
Instructions for handling the drive cage and operating panel module during conversion.
Attaching rack cover and configuring the server type in ServerView.
Illustrations showing power and data cable connections for various server configurations.
List of technical abbreviations used in the manual.
List of other relevant manuals and documentation for further information.
To Next Page