Need help?Do you have a question about the Fujitsu PRIMERGY TX150 S4 and is the answer not in the manual?
Details on expanding and upgrading server components like memory and drives.
Guidelines for installing memory modules into the server's memory banks.
Step-by-step instructions for adding or replacing RAM modules.
Procedures for installing drives like tape or optical drives into 5.25-inch bays.
Instructions for adding an extension box for more hard disk drives.
General| Form Factor | Tower |
|---|---|
| Processor Sockets | 1 |
| Memory Slots | 4 |
| Operating System | Windows Server, Linux |
| Processor | Intel Celeron |
| Storage | Up to 4 SATA HDDs |
| RAID Support | RAID 0/1 |
| Network Interface | Gigabit Ethernet |
To Next Page
