Need help?Do you have a question about the Fujitsu Primergy RX100 S4 and is the answer not in the manual?
General| Form Factor | 1U Rack |
|---|---|
| Number of Processors | 1 |
| RAID Support | RAID 0, 1, 5, 10 |
| Network Interface | Dual Gigabit Ethernet |
| Operating System Support | Windows Server, Linux |
| Storage | Up to 4TB SATA or SAS |
| RAID Controller | Optional |
Describes the scope, target audience, and related manuals for the service supplement.
Explains the symbols, formatting, and warnings used throughout the manual.
Steps to safely prepare the server for internal component access and replacement.
Instructions for removing and installing the server's LED board.
Guide to safely remove and install a new power supply unit.
Procedure for replacing the server's system fans.
Steps to remove and install the SAS/SATA backplane.
Instructions for replacing the server's riser card.
Detailed steps for safely removing and installing the server's processor.
Guide to remove and install the server's main system board.
Diagram and description of the LED board layout and part number.
Diagram and description of the SATA backplane layout and connectors.
Diagram and description of Riser card 1 slots and configuration.
Diagram and description of Riser card 2 slots and configuration.
To Next Page
