Need help?Do you have a question about the Fujitsu PRIMERGY RX100 S8 and is the answer not in the manual?
General| CPU Family | Intel Xeon |
|---|---|
| Memory Type | DDR3 |
| Memory Slots | 4 |
| Maximum Memory | 32 GB |
| Network Interface | Gigabit Ethernet |
| Processor | Intel Xeon E3-1200 v2 |
| Storage | SAS, SATA |
| RAID Support | RAID 0, 1, 10 |
| Drive Bays | 4 x 3.5" or 8 x 2.5" |
Defines the manual's scope, audience, and prerequisites for understanding.
Lists related documents and online resources for comprehensive information.
Explains symbols, formatting, and conventions used throughout the manual.
Details the key hardware and software features of the PRIMERGY RX100 S8 server.
Provides technical specifications including system board, processor, memory, and interfaces.
Crucial safety guidelines for handling, installation, and operation to prevent hazards.
Information on the server's compliance with ENERGY STAR for energy efficiency.
Statement regarding the system's compliance with relevant EC directives for electromagnetic compatibility.
Compliance statement for FCC rules and Canadian interference standards for digital devices.
Guidelines for safely transporting the server to prevent damage from impacts and jolts.
Specific precautions and requirements for securely installing the server within a rack.
Information on environmentally friendly design, energy saving, and proper disposal.
Step-by-step instructions for safely unpacking the server and its components.
Procedures for mounting and dismounting the server within a compatible rack system.
Details on available connectors and how to connect external devices to the server.
Guidance on connecting the server's power supply unit to the electrical mains.
Important precautions for safely connecting and disconnecting various cables.
Identifies and describes the function of front and rear panel controls and status LEDs.
Procedures for powering the server on, off, and managing its operational states.
Overview of steps for configuring the server and installing the operating system.
Instructions and precautions for safely cleaning the server's exterior and components.
Explains how to use BIOS Setup options to protect system data and prevent unauthorized access.
Diagnoses and resolves issues where the power-on indicator does not light up.
Troubleshooting steps when the server unexpectedly shuts down or turns off.
Solutions for scenarios where the monitor connected to the server displays nothing.
Addresses issues causing distorted or flickering display patterns on the monitor.
Provides checks and solutions for problems with the optical drive failing to read disks.
To Next Page
