To Next PageTo Next Page
Need help?Do you have a question about the Fujitsu Primergy RX100 S2 and is the answer not in the manual?
General| Form Factor | 1U rack |
|---|---|
| Processor Sockets | 1 |
| Max. Memory | 8 GB |
| Storage Controller | Integrated SATA controller |
| Network | 2 x Gigabit Ethernet |
| Operating System Support | Windows Server, Linux |
| Processor | Intel Xeon processor (single) |
| Memory Type | DDR2 ECC |
| Storage | Up to 2 x 3.5" SATA HDD |
| RAID Support | RAID 0, 1 |
| Power Supply | Single power supply |
Describes the key features and specifications of the PRIMERGY RX100 S2 server.
Details on software provided with the server, including ServerStart and high reliability tools.
Steps for installing internal options and performing hardware settings before OS installation.
Guides the user in choosing an OS installation method, including ServerStart.
Critical notes and cautions regarding OS installation, partition size, and RAID configuration.
Step-by-step wizard for OS installation using ServerStart in guided mode.
Setting up installation information in advance using a configuration file via preconfiguration mode.
Advanced OS installation method using Disk Manager for experienced users.
Procedures for installing the OS remotely over the network using PXE or resource servers.
Using a configuration file to efficiently install the OS on multiple servers simultaneously.
Instructions on creating necessary driver disks for manual OS installation.
Step-by-step instructions for manually installing Windows Server 2003 and Windows 2000 Server.
Steps for installing LAN drivers for Windows Server 2003 and Windows 2000 Server.
Guide on starting, exiting, and navigating the BIOS Setup Utility for system configuration.
Guidance on resolving hardware, error message, and software problems encountered with the server.
