Fujitsu Primergy RX100 S2 User Manual

59
PRIMERGY RX100 S2 User’s Guide
1
2
3
4
5
6
7
9
8
OS Installation Using ServerStart
3.1.3 RAID Wizard
Configure RAID. In the guided mode, the RAID wizard is displayed only when a RAID card is installed.
 When changing the RAID card, delete the physical pack beforehand. For details on how to delete a
physical pack, refer to "PRIMERGY ServerBooks" supplied with the server, and "Supplement" supplied
with the RAID card.
1 Click [RAID Wizard: Setting for the RAID system].
The [RAID Configuration] window appears.
Only array controllers already installed are displayed.
The number of hard disk units connected to the array controller is displayed.
 If you open a configuration file that has been created before, displayed settings may differ from
the previously set values. Be sure to check the settings.
2 Set items and click [leave wizard].
The RAID wizard closes.

Fujitsu Primergy RX100 S2 Specifications

General

Brand	Fujitsu
Model	Primergy RX100 S2
Category	Server
Language	English