Fujitsu Primergy RX100 S2 - Cautions for Manual Installation

47
PRIMERGY RX100 S2 User’s Guide
1
2
3
4
5
6
7
9
8
Checking before OS Installation
2.3.6 Cautions for Manual Installation
■ Notes on Using a RAID Card
In addition to the completion of RAID card configuration, the hard disk under the RAID card must be
initialized before the OS is installed. To check the RAID card configuration, start up WebBIOS. For
more details, refer to "PRIMERGY ServerBooks" supplied with the server, and "Supplement" supplied
with the RAID card.
■ Free Space Required for Installation
The partition where the OS is installed must have enough free space for obtaining memory dump. For
more details, refer to "5.1 Memory Dump/Paging File Setting" (
pg.126).
■ Cautions on Restarting
In the course of installation, a message appears to indicate that the setup program restarts. Wait until it
restarts.
For background operations, refer to "PRIMERGY ServerBooks" supplied with the server, and
"Supplement" supplied with the RAID card.