Fujitsu Primergy RX100 S2 User Manual

172
Chapter 7 Installing Internal Options
■ Notes on Installation
● Drivers
For expansion card drivers, refer to "2.3.5 Expansion Cards Supported by ServerStart" (pg.46).
● Notes on Each Card
For notes of specific expansion card, refer to the manuals supplied with the card and the notes provided
with the server. Also, check the following for respective expansion cards.
● SCSI Card/RAID Card
• Connect a SCSI option supported by this server to the SCSI or RAID card.
Unsupported SCSI option are not guaranteed.
• Do not connect both an internal SCSI device and an external device together to the SCSI card.
• If an internal hard disk unit where an OS has been installed is not connected to the SCSI card, set the
card BIOS to [Disabled].
For the BIOS setup of SCSI cards, refer to the manual supplied with the expansion card.
• Precautions before OS installation
In addition to the completion of RAID card/SCSI card configuration, the hard disk under the RAID
card must be initialized before the OS is installed.

Fujitsu Primergy RX100 S2 Specifications

General

Brand	Fujitsu
Model	Primergy RX100 S2
Category	Server
Language	English