EasyManuals Logo

Fujitsu Primergy RX100 S2 User Manual

Fujitsu Primergy RX100 S2
275 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #120 background imageLoading...
Page #120 background image
120
Chapter 4 Manual OS Installation
4.3 Installing the LAN Driver
This section explains the procedure for installing the driver.
In addition to the case where the OS is installed manually, the driver must be installed
when a LAN card is added.
4.3.1 Installing the LAN Driver (Windows Server 2003)
The LAN driver installation procedure differs depending on whether the network adapter was
recognized during the OS installation.
 For the following LAN cards, the network adapter is recognized when the card is mounted during OS
installation.
• PG-1852
• PG-1862
1 Click [Start] → [Administrative Tools] → [Computer Management].
2 Click [Device Manager].
On the Device Manager list, check if a recognized network adapter is present.
(Window example)
When a recognized network adapter is present, [Network adapters] appears.
Recognized
network adapter
Unrecognized
network adapte
r

Table of Contents

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Fujitsu Primergy RX100 S2 and is the answer not in the manual?

Fujitsu Primergy RX100 S2 Specifications

General IconGeneral
Form Factor1U rack
Processor Sockets1
Max. Memory8 GB
Storage ControllerIntegrated SATA controller
Network2 x Gigabit Ethernet
Operating System SupportWindows Server, Linux
ProcessorIntel Xeon processor (single)
Memory TypeDDR2 ECC
StorageUp to 2 x 3.5" SATA HDD
RAID SupportRAID 0, 1
Power SupplySingle power supply

Related product manuals