EasyManua.ls Logo

Fujitsu Primergy RX100 S2 - Saving;Deleting the System Event Log

Fujitsu Primergy RX100 S2
275 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
241
PRIMERGY RX100 S2 User’s Guide
9
Operation and Maintenance
2 Use the [] and [] keys to select [System Event Log (SEL)], and press the
[Enter] key.
The [SYSTEM EVENT LOG (SEL)] window appears.
3 Use the following key operations to scroll the window and check the contents.
[], [], [], [], [PageUp], [PageDown], [Ctrl] + [Home], [Ctrl] + [End]
4 To exit the system event log, press the [Esc] key.
9.3.3 Saving/Deleting the System Event Log
When the system event log is full, the oldest log is overwritten with the newest log. Periodically check
the system event log and save/delete as necessary.
Saving the System Event Log
1 Start Server Management Tools.
The menu window of Server Management Tools appears.
2 Use the [] and [] keys to select [System Event Log (SEL)], and press the
[Enter] key.
The [SYSTEM EVENT LOG (SEL)] window appears.
3 Press the [F2] key.
4 Enter the name of the file to save the system event log to, and press the [Enter]
key.
The system event log is saved to the floppy disk under the specified file name.
004 MMM-DD-YYYY HH:MM:SS [*****] ****************************************
003 MMM-DD-YYYY HH:MM:SS [*****] ****************************************
002 MMM-DD-YYYY HH:MM:SS [*****] ****************************************
001 MMM-DD-YYYY HH:MM:SS [*****] ****************************************
000 MMM-DD-YYYY HH:MM:SS [*****] ****************************************
FUJITSU
SIEMENS
COMPUTERS
SYSTEM EVENT LOG (SEL)
< ,PgUp/Dn,(Ctrl-)Home/End> Move <F2> SaveToFile <F3> Clear <ESC> Exit

Table of Contents

Related product manuals