Fujitsu Primergy RX100 S2 - 3.1 Guided Mode OS Installation

54
Chapter 3 OS Installation Using ServerStart
3.1 Guided mode
In guided mode, follow the wizard to specify hardware configuration and the OS to be
installed, save the information necessary for installation in a configuration file, and
install the OS.
3.1.1 Starting Up the Guided Mode
Start up the guided mode.
1 Turn on the server and insert the ServerStart CD-ROM immediately.
ServerStart starts up and a message appears prompting you to insert the ServerStart floppy disk.
2 Insert the ServerStart floppy disk supplied with the server. Make sure that
"Removable media" and "A:" are selected and click [Create].
 Set the ServerStart floppy disk in the write-enabled state.