Fujitsu Primergy RX100 S2 User Manual

177
PRIMERGY RX100 S2 User’s Guide
7
Installing Internal Options
7.5 Installing an Internal CD-ROM
Drive Unit
This section explains the procedure for installing a CD-ROM drive (optional).
7.5.1 Installable CD-ROM Drive Units
The following CD-ROM drive units can be installed on this server.
Package
 Before installing the internal CD-ROM drive unit, refer to "Appendix B.2 Internal CD-ROM Drive Unit
Specifications" (pg.262) to check the contents of the package.
• Before installation or removal, turn off the server and all peripheral devices.
Also unplug all power cables from the server. Failure to do so can cause
electric shock ("1.4.3 Turning Off the Server" (pg.31)).
• When installing a CD-ROM drive, hold it by the side. Applying force to the top
can cause failures.
• The circuit boards and soldered parts of internal options are exposed. They
can be damaged by static electricity.
Before handling them, first touch a metal part of the server to discharge static
electricity.
• Do not touch the circuitry on boards or soldered parts. Hold the metallic areas
or the edges of the circuit boards.
table: Installable CD-ROM Drive Units
Product name Model name Remarks
CD-ROM ATAPI PG-CD320 IDE (ATAPI)

Fujitsu Primergy RX100 S2 Specifications

General

Brand	Fujitsu
Model	Primergy RX100 S2
Category	Server
Language	English