Fujitsu Primergy RX100 S2 User Manual

268
Appendix
C.4 Switching between Functions
This section explains how to switching between functions.
■ Switching from Console Redirection to the Remote Control Function
1 In the terminal software executing console redirection, press the [Esc] key and
press the [Shift] + [8] keys.
Console redirection switches to the remote control function.
For operation of the Remote Control Utility, refer to "C.3 Operating the Remote Control Utility"
(
pg.266).
■ Switching from the Remote Control Function to Console Redirection
1 Exit the Remote Control Utility.
Select [0] from the menu of the Remote Control Utility.
The following message appears.
2 Press the [Enter] key, then the [Shift] + [Q] keys.
The terminal software window changes to the console redirection window.
(5) Power On The server will be turned on. -
(6) View System
Event log (SEL)
The event log will be
displayed.
-
(0) - The menu closes.
Login>
table: Menu Items and Operations
Menu Operation Operation after selecting the item

Fujitsu Primergy RX100 S2 Specifications

General

Brand	Fujitsu
Model	Primergy RX100 S2
Category	Server
Language	English