62
Chapter 3 OS Installation Using ServerStart
3.1.5 OS Installation Wizard
Set computer information, user information, and the network protocol.
ServerStart can configure multiple network patterns. When configuring a domain controller, refer to
"Using ServerStart to configure the Network".
The setting window differs depending on the OS to be installed. The following describes operations on
Windows Server 2003.
1 Click [Windows Server 2003 setup configuration Wizard].
The [Windows Installation] window appears.
2 Enter the password in [Password for Administrator account] and click [Next].
If the Windows Server 2003 is running, be sure to enter the Administrator's password.
The [Computer Identification] window appears.
To Next Page
Loading...
Need help?
General