Name: Fujitsu Primergy RX100 S2
Brand: Fujitsu
Rating: 4 (1 reviews)

To Next Page

To Previous Page

115

PRIMERGY RX100 S2 User’s Guide

Manual OS Installation

7 Install the chipset driver.

1. Insert the ServerStart CD-ROM into the drive of the server.

When the ServerStart window appears, exit ServerStart.

2. Execute the following command on the ServerStart CD-ROM.

[CD-ROM drive]:\DRIVERS\ChipSet\Intel\E7210\Setup.exe

The installation wizard starts up.

3. Click [Next]. Follow instructions in the window to perform installation.

4. When the "InstallShield(R) wizard has completed." message appears, eject the

ServerStart CD-ROM from the CD-ROM drive and click [Finish] to restart the

system.

8 Install the LAN driver.

Install the LAN driver using the driver disk created from the ServerStart CD-ROM. For more

details, refer to "4.3.1 Installing the LAN Driver (Windows Server 2003)" (

pg.120).

9 Apply Windows Server 2003 Service Pack 1.

For details, refer to the description in the window.

Drivers may be replaced with those in the Service Pack during Service Pack application. For

more details, refer to the manual supplied with the hardware.

10 Install high reliability tools.

To ensure stable server operation, refer to "Chapter 6 High Reliability Tools" (pg.155) and

install high reliability tools.

The installation of Windows Server 2003 has completed.

● Before Starting Operation

After OS installation, refer to "Chapter 5 Operations after OS Installation" (pg.125) and perform the

necessary procedures.

Questions and Answers:

Need help?

Do you have a question about the Fujitsu Primergy RX100 S2 and is the answer not in the manual?

Fujitsu Primergy RX100 S2 Specifications

General