U41629-J-Z156-2-76 Options Guide 43
8 RemoteView components
V CAUTION!
Observe the safety instructions in the chapter “Safety notes” on page 13
et seqq..
8.1 RemoteView Service Board S2 LP
I How to configure the RSB S2 LP is described in detail in the User Guide
“RemoteView”.
The preferred mounting location for the RSB S2 is PCI slot 1.
The RSB S2 LP is connected to the system board via a power and a data cable.
The RSB S2 LP kit contains an external power supply.
To Next Page
Loading...
