EasyManua.ls Logo

Fujitsu PRIMERGY TX1310 M3

Fujitsu PRIMERGY TX1310 M3
68 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Loading...
Operating Manual - English
FUJITSU Server PRIMERGY TX1310 M3
Operating Manual
January 2018

Table of Contents

Other manuals for Fujitsu PRIMERGY TX1310 M3

Question and Answer IconNeed help?

Do you have a question about the Fujitsu PRIMERGY TX1310 M3 and is the answer not in the manual?

Fujitsu PRIMERGY TX1310 M3 Specifications

General IconGeneral
Processor cache8 MB
Processor cores4
Processor modelE3-1225V6
System bus rate8 GT/s
Motherboard chipsetIntel® C236
Processor frequency3.3 GHz
Processor cache typeSmart Cache
Processor lithography14 nm
Processor boost frequency3.7 GHz
Processor operating modes64-bit
Number of processors installed1
ECCYes
Internal memory8 GB
Memory clock speed2400 MHz
Internal memory typeDDR4-SDRAM
Maximum internal memory64 GB
HDD size3.5 \
HDD speed7200 RPM
RAID levels0, 1, 10
HDD capacity1000 GB
HDD interfaceSerial ATA III
Optical drive typeDVD-RW
Total storage capacity2000 GB
Maximum storage capacity- TB
Number of HDDs installed2
On-board graphics card modelIntel® HD Graphics 630
LAN controllerIntel® I219
Cabling technology10/100/1000Base-T(X)
Ethernet interface typeGigabit Ethernet
Serial ports quantity-
USB 2.0 ports quantity3
VGA (D-Sub) ports quantity0
USB 3.2 Gen 1 (3.1 Gen 1) Type-A ports quantity6
Chassis typeTower
Compatible operating systemsMicrosoft Hyper-V Server 2012 R2 Microsoft Hyper-V Server 2016 Microsoft Windows Server 2012 R2 Datacenter Microsoft Windows Server 2016 Datacenter Microsoft Windows Server 2012 R2 Standard Microsoft Windows Server 2016 Standard Microsoft Windows Server 2012 R2 Essentials Microsoft Windows Server 2016 Essentials Microsoft Windows Server 2012 R2 Foundation Microsoft Windows Storage Server 2012 R2 Standard Microsoft Windows Storage Server 2016 Standard Microsoft Hyper-V Server 2012 Microsoft Windows Server 2012 Datacenter Microsoft Windows Server 2012 Standard Microsoft Windows Server 2012 Essentials Microsoft Windows Server 2012 Foundation SUSE Linux Enterprise Server 12 Red Hat Enterprise Linux 7
Power supply250 W
Power supply input frequency50 - 60 Hz
Redundant power supply (RPS) supportNo
Operating temperature (T-T)10 - 35 °C
CertificationCB, RoHS, WEEE, GS, CE, CSA us, ULc/us, FCC Class A, VCCI:V3 Class A + JIS 61000-3-2, KC, CCC, C-Tick (AS / NZS CISPR 22 Class A)
Sustainability certificatesEPEAT Gold
Weight and Dimensions IconWeight and Dimensions
Depth305 mm
Width180 mm
Height375 mm
Weight14000 g

Summary

Before reading this manual

For your safety

Provides important information for safely and correctly using the product.

Functional overview

2.1 Features

Details the server's key hardware and software features.

2.2 Server specification

Lists the detailed technical specifications of the server.

Important information

4.1 Safety instructions

Provides critical safety guidelines for server operation and handling.

Hardware installation

5.1 Unpacking the server

Instructions for safely unpacking the server and checking contents.

5.2 Setting up the server

Guidance on physically positioning and preparing the server.

5.3 Connecting devices to the server

Details on connecting external devices via front and rear ports.

5.4 Connecting the server to the mains

Instructions for connecting the server to the power supply.

Starting up and operation

6.3 Switching the server on and off

Step-by-step guide for powering the server on and off.

6.4.1 Configuring the onboard SATA controller

Steps to configure the onboard SATA controller.

Property and data protection

7.1 BIOS Setup security functions

Explains how to use BIOS Setup for data security and access control.

Related product manuals