Need help?Do you have a question about the Fujitsu PRIMERGY TX1330 M3 and is the answer not in the manual?
General| Processor socket | - |
|---|---|
| Built-in processor | No |
| Motherboard chipset | IntelĀ® C236 |
| Compatible processor series | Intel Core i3, Intel Pentium Dual-Core, Intel Xeon |
| Number of processors supported | 1 |
| ECC | Yes |
| Number of DIMM slots | 4 |
| Supported memory types | DDR4-SDRAM |
| Maximum internal memory | 64 GB |
| Storage drive sizes supported | 2.5, 3.5 \ |
| Supported storage drive types | HDD & SSD |
| Number of storage drives supported | 24 |
| Supported storage drive interfaces | Serial ATA, Serial Attached SCSI (SAS) |
| LAN controller | Intel I210 |
| Ethernet LAN data rates | 10, 100, 1000 Mbit/s |
| Ethernet interface type | Gigabit Ethernet |
| USB 2.0 ports quantity | USB 2.0 ports have a data transmission speed of 480 Mbps, and are backwards compatible with USB 1.1 ports. You can connect all kinds of peripheral devices to them. |
| Ethernet LAN (RJ-45) ports | 2 |
| PCI Express slots version | 3.0 |
| Chassis type | Rack (4U) |
| Product color | Black, Red |
Defines the manual's purpose, scope, and intended audience.
Lists other relevant documents for the server and their sources.
Explains symbols and text formatting used in the manual.
Details the core features of the PRIMERGY TX1330 M3 server.
Details server system board, processor, and memory configurations.
Describes server interfaces, onboard controllers, slots, and drive bays.
Specifies operating ambient conditions and lists compliance standards.
Outlines the sequence of steps for installing the server.
Instructions for wiring and connecting the server to the mains power.
Crucial safety guidelines for server installation and operation.
Guidelines for server installation, power, cables, and operation.
Guidelines for safely transporting the server and installing it in a rack.
Covers environmental protection, energy saving, compliance standards, and disposal.
Instructions for safely unpacking the server and checking its contents.
Guides for setting up the server in a floorstand configuration.
Procedures for installing and removing the server from a rack.
Instructions for connecting external devices and the server to the power supply.
Procedures for accessing server drives on the floorstand model.
Overview of server control buttons and status indicators on front/rear panels.
Procedures for powering the server on and off.
Information on configuring the server and installing the operating system.
How to activate and use BIOS Setup security features for data protection.
Troubleshooting steps when the power-on indicator remains unlit.
Troubleshooting for server switching off and blank screen problems.
Troubleshooting for monitor flickering, display drifts, and mouse pointer problems.
Troubleshooting for drive errors, defective drives, and system warnings.
To Next Page