EasyManuals Logo
Home>Fujitsu>Server>PRIMERGY TX1330 M3

Fujitsu PRIMERGY TX1330 M3 User Manual

Fujitsu PRIMERGY TX1330 M3
92 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #61 background imageLoading...
Page #61 background image
TX1330 M3
Operating Manual 61
Starting up and operation
6.1.2 Access to the HDD modules (floorstand model)
Figure 6: Removing the hard disk cover
Ê Unlock the server (1).
Ê Remove the HDD/SSD cover (2).
The HDD/SSD cover is replaced and the server locked in the reverse order.

Table of Contents

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Fujitsu PRIMERGY TX1330 M3 and is the answer not in the manual?

Fujitsu PRIMERGY TX1330 M3 Specifications

General IconGeneral
Processor socket-
Built-in processorNo
Motherboard chipsetIntel® C236
Compatible processor seriesIntel Core i3, Intel Pentium Dual-Core, Intel Xeon
Number of processors supported1
ECCYes
Number of DIMM slots4
Supported memory typesDDR4-SDRAM
Maximum internal memory64 GB
Storage drive sizes supported2.5, 3.5 \
Supported storage drive typesHDD & SSD
Number of storage drives supported24
Supported storage drive interfacesSerial ATA, Serial Attached SCSI (SAS)
LAN controllerIntel I210
Ethernet LAN data rates10, 100, 1000 Mbit/s
Ethernet interface typeGigabit Ethernet
USB 2.0 ports quantityUSB 2.0 ports have a data transmission speed of 480 Mbps, and are backwards compatible with USB 1.1 ports. You can connect all kinds of peripheral devices to them.
Ethernet LAN (RJ-45) ports2
PCI Express slots version3.0
Chassis typeRack (4U)
Product colorBlack, Red

Related product manuals