EasyManuals Logo

Fujitsu PRIMERGY TX1330 M3 User Manual

Fujitsu PRIMERGY TX1330 M3
92 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #80 background imageLoading...
Page #80 background image
80 Operating Manual
TX1330 M3
Starting up and operation
6.4.2 Configuring the SAS/SATA RAID controller
(PCIe expansion card)
The server has a SAS/SATA RAID controller with "MegaRAID functionality". You
can configure the SAS/SATA RAID controller either before or during installation
with the ServerView Installation Manager. Using the ServerView Installation
Manager is recommended.
I A separate utility is available to the controller for MegaRAID
configuration. For further information, refer to the "LSI MegaRAID SAS
Software User Guide" (on the Fujitsu manuals server under x86 Servers -
Expansion Cards - Storage Adapters - LSI Configuration Software).
Further information on modular RAID controllers is provided in the
"Modular RAID Controller Installation Guide" (on the Fujitsu manuals
server under x86 Servers - Expansion Cards - Storage Adapters - LSI SAS /
SCSI RAID Controllers).
I Descriptions of operating systems not covered in the controller manual
are provided in the corresponding readme under:
http://www.fujitsu.com/global/services/computing/server/ia/driver/index.html
For Japan:
http://www.fujitsu.com/jp/products/computing/servers/primergy/downloads/

Table of Contents

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Fujitsu PRIMERGY TX1330 M3 and is the answer not in the manual?

Fujitsu PRIMERGY TX1330 M3 Specifications

General IconGeneral
Processor socket-
Built-in processorNo
Motherboard chipsetIntelĀ® C236
Compatible processor seriesIntel Core i3, Intel Pentium Dual-Core, Intel Xeon
Number of processors supported1
ECCYes
Number of DIMM slots4
Supported memory typesDDR4-SDRAM
Maximum internal memory64 GB
Storage drive sizes supported2.5, 3.5 \
Supported storage drive typesHDD & SSD
Number of storage drives supported24
Supported storage drive interfacesSerial ATA, Serial Attached SCSI (SAS)
LAN controllerIntel I210
Ethernet LAN data rates10, 100, 1000 Mbit/s
Ethernet interface typeGigabit Ethernet
USB 2.0 ports quantityUSB 2.0 ports have a data transmission speed of 480 Mbps, and are backwards compatible with USB 1.1 ports. You can connect all kinds of peripheral devices to them.
Ethernet LAN (RJ-45) ports2
PCI Express slots version3.0
Chassis typeRack (4U)
Product colorBlack, Red

Related product manuals