EasyManuals Logo
Home>Fujitsu>Server>PRIMERGY TX1330 M3

Fujitsu PRIMERGY TX1330 M3 User Manual

Fujitsu PRIMERGY TX1330 M3
92 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #88 background imageLoading...
Page #88 background image
88 Operating Manual
TX1330 M3
Troubleshooting and tips
8.2 Server switches itself off
Server Management has detected an error
Ê Check the error list of System Event Log in ServerView Operations Manager
or in the iRMC web interface, and attempt to eliminate the error.
8.3 Screen remains blank
Monitor is switched off
Ê Switch on your monitor.
Screen has gone blank
Ê Press any key on the keyboard.
or
Ê Deactivate screen saver. Enter the appropriate password.
Brightness control is set to dark
Ê Set the brightness control on the monitor to light. For detailed information,
refer to the operating manual supplied with your monitor.
Power cable or monitor cable not connected
Ê Switch off the monitor and the server.
Ê Check whether the power cable is properly connected to the monitor and to
the grounded power outlet.
Ê Check whether the monitor cable is properly connected to the server and
monitor (if it is plugged in with a connector). If a separate graphics card is
installed in the server, then the monitor cable must be connected to the
graphics card.
Ê Switch on the monitor and the server.

Table of Contents

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Fujitsu PRIMERGY TX1330 M3 and is the answer not in the manual?

Fujitsu PRIMERGY TX1330 M3 Specifications

General IconGeneral
Processor socket-
Built-in processorNo
Motherboard chipsetIntel® C236
Compatible processor seriesIntel Core i3, Intel Pentium Dual-Core, Intel Xeon
Number of processors supported1
ECCYes
Number of DIMM slots4
Supported memory typesDDR4-SDRAM
Maximum internal memory64 GB
Storage drive sizes supported2.5, 3.5 \
Supported storage drive typesHDD & SSD
Number of storage drives supported24
Supported storage drive interfacesSerial ATA, Serial Attached SCSI (SAS)
LAN controllerIntel I210
Ethernet LAN data rates10, 100, 1000 Mbit/s
Ethernet interface typeGigabit Ethernet
USB 2.0 ports quantityUSB 2.0 ports have a data transmission speed of 480 Mbps, and are backwards compatible with USB 1.1 ports. You can connect all kinds of peripheral devices to them.
Ethernet LAN (RJ-45) ports2
PCI Express slots version3.0
Chassis typeRack (4U)
Product colorBlack, Red

Related product manuals