Need help?Do you have a question about the Fujitsu PRIMERGY TX1310 M5 and is the answer not in the manual?
Explains the manual's purpose and intended audience for server upgrades and maintenance.
Details symbols and formatting used in the manual for clarity and consistency.
Covers essential preliminary steps and general information before commencing any server tasks.
Defines categories for maintenance tasks based on complexity and required qualifications.
Provides estimated timeframes for various hardware maintenance tasks.
Lists the necessary tools required for performing maintenance tasks.
Guides users on accessing and utilizing related documentation for support.
Crucial safety guidelines and precautions to prevent injury and equipment damage during operation.
Details the system's compliance with European regulations and certification requirements.
Outlines FCC compliance information and potential radio interference guidelines.
Covers environmentally friendly design, energy saving, and disposal information.
Step-by-step instructions for unlocking the server chassis for access.
Procedures for safely powering down the server before performing maintenance.
Instructions on how to safely disconnect the server from the power source.
Guides on how to open the server and access internal components.
Steps for correctly putting the server back together after maintenance.
Instructions for safely reconnecting the server to the power source.
Procedures for powering on the server after maintenance is complete.
Steps to secure the server chassis after all maintenance is finished.
Steps to prepare the server's software state for maintenance, like suspending BitLocker.
Procedures to finalize software configurations after hardware maintenance.
Essential safety precautions when working with the power supply unit.
Detailed steps for removing and installing the server's power supply unit.
Critical safety guidelines for handling and replacing hard disk drives.
Instructions for installing and removing 2.5-inch HDDs or SSDs.
Procedures for installing and removing 3.5-inch HDDs.
Safety precautions related to the server's cooling fan modules.
Step-by-step guide for replacing the rear cooling fan.
Detailed instructions for replacing the front cooling fan.
Safety precautions for installing and removing expansion cards.
Information on how to manage and install slot brackets for expansion cards.
Procedures for installing new expansion cards into the server.
Steps for removing and replacing existing expansion cards.
Crucial safety guidelines for handling and installing memory modules.
Step-by-step instructions for adding memory modules to the server.
Procedures for removing and replacing existing memory modules.
Essential safety precautions when handling the CPU and heat sink.
Comprehensive guide for installing or replacing the server's CPU.
Detailed steps for removing and installing the CPU heat sink.
Safety precautions for installing and removing accessible drives.
Instructions for installing and removing the optical disk drive.
Procedures for installing and removing the RDX backup drive.
Identifies and describes front panel connectors and status indicators.
Safety precautions when installing or removing the serial interface.
Step-by-step guide for installing a serial interface card.
Procedures for removing and replacing the serial interface.
Safety precautions for working with the system board and its components.
Information about the CMOS battery and its function.
Details on installing, removing, and configuring the TPM module.
Instructions for installing and removing M.2 Solid State Drives.
Comprehensive procedure for replacing the server's main system board.
Essential safety precautions when handling and replacing cables.
Instructions for replacing system cables connected to drives.
Procedures for replacing HDD cables in the bottom drive cage.
Visual guide to the server's physical layout and components.
Identification and description of system board connectors and panel indicators.
Information on jumper settings and system board configurations.
Steps to configure the server for basic startup diagnostics.
Lists additional reference manuals and documentation available for the server.
To Next Page
General