Need help?Do you have a question about the Fujitsu PRIMERGY TX2550 M5 and is the answer not in the manual?
General| Tcase | 78 °C |
|---|---|
| Scalability | 2S |
| Processor cache | 13.75 MB |
| Processor cores | 10 |
| Processor model | 4210 |
| System bus rate | - GT/s |
| Processor socket | LGA 3647 (Socket P) |
| Processor threads | 20 |
| Processor codename | Cascade Lake |
| Execute Disable Bit | Yes |
| Processor frequency | 2.2 GHz |
| Processor lithography | 14 nm |
| Processor manufacturer | Intel |
| Processor package size | 76.0 x 56.5 mm |
| Processor boost frequency | 3.2 GHz |
| Processor operating modes | 64-bit |
| Supported instruction sets | AVX-512 |
| Thermal Design Power (TDP) | 85 W |
| Number of processors installed | 1 |
| Maximum number of PCI Express lanes | 48 |
| Memory types supported by processor | DDR4-SDRAM |
| Memory clock speeds supported by processor | 2400 MHz |
| Maximum internal memory supported by processor | 1024 GB |
| Memory slots | 12 |
| Internal memory | 16 GB |
| Memory clock speed | 2933 MHz |
| Maximum internal memory | 1500 GB |
| HDD size | 2.5 \ |
| RAID levels | 0, 1, 5, 6, 10, 50, 60 |
| HDD interface | Serial ATA, Serial Attached SCSI (SAS) |
| Optical drive type | No |
| Total storage capacity | 0 GB |
| Maximum storage capacity | - TB |
| Number of HDDs supported | 8 |
| Chassis type | Tower |
| Product color | Black, Red |
| Operating system installed | - |
| Compatible operating systems | Microsoft Hyper-V Server 2016 Microsoft Windows Server 2016 Datacenter Microsoft Windows Server 2016 Standard Microsoft Windows Server 2016 Essentials Microsoft Windows Storage Server 2016 Standard Microsoft Hyper-V Server 2012 R2 Microsoft Windows Server 2012 R2 Datacenter Microsoft Windows Server 2012 R2 Standard Microsoft Windows Server 2012 R2 Essentials Microsoft Windows Storage Server 2012 R2 Standard VMware vSphere 6.5 VMware vSphere 6.0 SUSE Linux Enterprise Server 12 Red Hat Enterprise Linux 7 Red Hat Enterprise Linux |
| Power supply | 800 W |
| Cabling technology | 10/100/1000Base-T(X) |
| Ethernet interface type | Gigabit Ethernet |
| Operating temperature (T-T) | 5 - 45 °C |
| Operating relative humidity (H-H) | 10 - 85 % |
| Certification | CB, RoHS, WEEE, GS, CE, CSAc/us, FCC Class A, VCCI, KN32, KN35, CCC, C-Tick |
| USB 2.0 ports quantity | 0 |
| Ethernet LAN (RJ-45) ports | 2 |
| USB 3.2 Gen 1 (3.1 Gen 1) Type-A ports quantity | 6 |
| PCI Express slots version | 3.0 |
| On-board graphics card model | Not available |
| Processor ARK ID | 193384 |
Weight and Dimensions| Depth | 177 mm |
|---|---|
| Width | 448 mm |
| Height | 736 mm |
Explains symbols and formatting used in the manual for clarity.
Lists available documentation and resources for the server.
Provides a general overview of the server's layout and design.
Highlights the key features and capabilities of the server.
Details physical connectors, controls, and status indicators on the server.
Crucial safety instructions and precautions for handling and operating the server.
Information regarding the server's compliance with ENERGY STAR energy efficiency standards.
Statement on the server's compliance with European CE marking regulations.
Compliance statement for FCC Class A regulations regarding radio frequency interference.
Guidelines for environmentally friendly product design, packaging, and disposal.
A comprehensive overview of the server installation process.
Procedures and safety notes for unpacking the server.
Specific instructions for setting up the floorstand configuration of the server.
Detailed steps for securely installing the server into a rack system.
Instructions for correctly connecting all necessary cables to the server.
Guide to the initial power-on procedure for the server.
Steps for server configuration using the FUJITSU ServerView Installation Manager.
Guide to configuring the server without using the ServerView Installation Manager.
Important considerations and notes for configuring server controllers.
Information and guidance regarding the server's operating system.
Instructions for safely powering the server on and off.
Procedures for accessing and removing drive covers on the floorstand model.
Step-by-step guide for installing or replacing HDD/SSD modules.
Instructions for installing an additional power supply unit for redundancy.
Guidelines and precautions for cleaning the server's exterior and components.
Troubleshooting steps for issues with the power-on indicator.
Solutions for boot failures occurring after a new HDD installation.
Steps to resolve issues where the display screen remains blank.
Troubleshooting for problems with screen display or image drift.
Guidance for diagnosing and resolving unexpected server shutdowns.
Steps to fix issues where the mouse pointer is not visible on the screen.
Troubleshooting steps for unresponsive keyboard or mouse input.
Procedures to correct incorrect system time and date settings.
Information and actions related to server temperature warnings.
Troubleshooting steps when a newly added drive is reported as defective.
Solutions when expansion cards or onboard devices are not detected.
Steps to resolve problems with the Optical Disk Drive reading media.
Specifications of the server's system board and chipset.
Details on memory slots, types, capacity, and protection mechanisms.
Overview of the server's available USB, graphics, serial, and LAN interfaces.
Technical specifications for RAID, SATA, LAN controllers, and TPM.
Information on the server's expansion slot types and configurations.
Details on the server's hard disk and SSD drive bay configurations.
Physical dimensions and weight of the server in floorstand and rack configurations.
Required minimum clearances for proper server ventilation.
Recommended operating and transport temperature and humidity ranges.
Acoustic noise values for the server in different operating modes.
Electrical specifications for the 450W Platinum power supply unit.
Electrical specifications for the 800W Platinum power supply unit.
Electrical specifications for the 800W Titanium power supply unit.
Electrical specifications for the 1200W Platinum power supply unit.
Lists safety, ergonomics, and EMC standards the product complies with.
Information and links regarding the server's warranty regulations.
Details on how to obtain service and contact local service partners.
To Next Page
