Fujitsu PRIMERGY TX2550 M5 - Using the Cable Clamp (AC PSU)

70 Operating Manual TX2550 M5
Starting up
5.5.3.2 Using the cable clamp (AC PSU)
You can secure the power cord with a cable clamp to ensure that the power cord
cannot be disconnected from the server by mistake. The cable clamp is
included in the accessories pack that is delivered together with the server.
Figure 17: Using cable clamps
Ê Pull the cable clamp up (1).
Ê Thread the power cord through the cable clamp (2).
Ê Press the cable clamp down until it engages to secure the cable (3).