▶
When using a RAID array, add the additional HDD/SSD to the RAID array
.
Configuring the RAID array, refer to the documentation of the RAID
controller, used in your configuration, see "Documentation overview"
on page 22.
Concluding steps
▶
"Reassembling" on page 50
.
▶
"Connecting the power cord" on page 56.
▶
"Switching on the server" on page 57.
▶
"Installing the bay cover" on page 58.
▶
"Locking the server" on page 59.
7.4.2 Removing a 3.5-inch HDD module
Upgrade and Repair Unit
(URU)
Hardware: 5 minutes
Tools: tool-less
Preliminary steps
▶
If the HDD module to be removed is combined into a RAID array, please
proceed as follows:
Hard disk drives (HDD)
92 Upgrade and Maintenance Manual TX1310 M5
To Next Page
Loading...
