The black TPM spacer is not used in this server.
15.4.2 Installing the TPM
Field Replaceable Unit
(FRU)
Hardware: 5 minutes
Software: 5 minutes
Tools: – Bit screw driver
–
TPM bit insert
(*)
(*)
For Japan:
– TPM module fixing tool (S26361-F3552-L909)
Preliminary steps
▶
"Unlocking the server" on page 39.
▶
"Removing the bay cover" on page 40.
▶
"Shutting down the server" on page 41.
▶
"Disconnecting the power cord" on page 42.
▶
"Getting access to the component" on page 43.
▶
Remove all expansion cards, see "Removing an expansion card" on
page 119.
Before removing the expansion cards, take a note on the installation
slot number for each card. Ensure that you reinstall the card in the
slot it was located before the replacement.
System board and components
TX1310 M5 Upgrade and Maintenance Manual 185
To Next Page
Loading...
