EasyManua.ls Logo

Fujitsu PRIMERGY TX1310 M5

Fujitsu PRIMERGY TX1310 M5
265 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
15.3 CMOS battery
15.3.1 Replacing the CMOS battery
Upgrade and Repair Unit
(URU)
Hardware: 5 minutes
Tools: tool-less; recommended: tooth pick
CAUTION
The CMOS battery must be replaced with an identical battery or
with a battery type recommended by the manufacturer
.
Keep lithium batteries away from children.
Do not throw batteries into the trash can. Lithium batteries must be
disposed of in accordance with local regulations concerning special
waste.
For more safety information, see "Environmental protection" in the
operating manual of your server.
Ensure to insert the CMOS battery with the positive pole facing
up!
Preliminary steps
"Suspending BitLocker functionality" on page 61.
T
ake a note of the BIOS settings.
"Unlocking the server" on page 39
"Removing the bay cover" on page 40
"Shutting down the server" on page 41
"Disconnecting the power cord" on page 42.
"Getting access to the component" on page 43.
System board and components
182 Upgrade and Maintenance Manual TX1310 M5

Table of Contents

Related product manuals