▶
"Connecting the power cord" on page 56
.
▶
"Switching on the server" on page 57.
▶
"Installing the bay cover" on page 58.
▶
"Locking the server" on page 59.
▶
"Resuming BitLocker functionality" on page 68.
▶
If applicable, "After replacing or upgrading LAN controllers" on page 71.
9.5 Removing an expansion card
Upgrade and Repair Unit
(URU)
Hardware: 5 minutes
Tools: Only for removing slot brackets:
– Phillips PH2 / (+) No. 2 screw driver
–
Hexagon screw driver (for hexagon bolt)
Preliminary steps
▶
"Suspending BitLocker functionality" on page 61.
▶
"Unlocking the server" on page 39.
▶
"Removing the bay cover" on page 40.
▶
"Shutting down the server" on page 41.
▶
"Disconnecting the power cord" on page 42.
▶
If applicable, disconnect all external cables from the expansion card.
▶
"Getting access to the component" on page 43.
Removing an expansion card
▶
If applicable, disconnect internal cables from the expansion card.
Expansion cards
TX1310 M5 Upgrade and Maintenance Manual 119
To Next Page
Loading...
Need help?
General